Zephyr ZMO-E30AS Manual descarregar pdf

RC-0001 DCBL Remote Installation Instructions

2277 Harbor Bay Pkwy

1.888.880.8368

Alameda, CA 94502

1. Locate Main PC Board on top of blower

housing of hood body. Remove (4) Main

PC Board cover screws.

2. Remove Main PC Board from PC Board box. Use

caution when removing Main PC Board as to not

disconnect any wires

4. Install Remote Module into Main PC

Board box by (2) screws.

5. Re-install Main PC Board into PC Board box.

Be sure blue antenna wire from Remote Module

is outside of PC Board box. Turn to page

2 for remote synchronization & features.

CAUTION: Hood must be disconnected from main power prior to performing the conversion

instructions listed below. Failure to do so could result in personal injury or damage the hood.

Inclided Materials: 1 Remote Module w/antenna

wire, 1 Remote control, 1 Remote control holder,

1 battery, 2 screws.

Page 1

3. Disconnect black switch cable A from Main PC

board and connect it to the Remote Module terminal.

Connect white cable B from Remote Module to Main

PC board switch terminal.

1 2

Resumo do Conteúdo

Página 1 - Alameda, CA 94502

RC-0001 DCBL Remote Installation Instructions2277 Harbor Bay Pkwy1.888.880.8368Alameda, CA 945021. Locate Main PC Board on top of blowerhousing of hoo

Página 2

RF REMOTE MAINTENANCE:Clean the remote control using non abrasive detergentsFollow instructions below for replacing battery.

Comentários a estes Manuais

Sem comentários

Zephyr ZMO-E30AS Manual

Consulte online ou descarregue Manual para não Zephyr ZMO-E30AS. Zephyr ZVNE42AG User manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com não Zephyr ZMO-E30AS